Building Automation Oct 27, 2026
Handling Sensor Units and Scaling in BMS Analytics
Five places in the chain can change what a reading means. Canonical units, converting once, and why analytics surfaces the problem.
Building Automation Oct 27, 2026
Late and Out-of-Order BACnet Readings: Storage and Reporting Rules
Buffered data arrives late and out of sequence. What the store must tolerate, and what to do about aggregates already computed.
CAFM Oct 27, 2026
BMS Data Completeness KPIs for Facilities Analytics
Coverage, completeness, freshness and validity: four measures that make the assumption behind every analytics figure checkable.
Building Automation Oct 27, 2026
How to Validate Meter Units Before Building Energy Reports
Rate or quantity, cumulative or interval, unit and prefix, and where the multiplier is applied. Four questions to answer per meter before any report is built.
Asset Management Oct 27, 2026
Sensor Replacement and Recalibration: Keeping BMS History Comparable
Replace a sensor and the point keeps its name while the instrument changes. How to record it so an analysis sees a discontinuity.
Building Automation Oct 27, 2026
BACnet Data Quality Flags: Missing, Bad and Out-of-Range Values
Devices already report whether they believe their own readings. What status, reliability and out-of-service tell you, and what they cannot.
Asset Management Oct 27, 2026
BMS Point Dictionary: Keeping the Register Alive After Handover
A handover schedule is a project document. The operational register needs quality status, expected intervals and update triggers.
Building Automation Oct 27, 2026
Store-and-Forward Buffering for BMS Gateways During Outages
Buffering turns an outage into a delay only if depth is sized from real outages and event times survive the replay intact.
Building Automation Oct 27, 2026
BACnet to MQTT Integration: Architecture and Considerations
Topic structure is an interface consumers couple to, so design it first. What belongs in the payload and what happens during a gap.
Asset Management Oct 27, 2026
BACnet Device Discovery: Running and Reading a Site Scan
The cheapest hour you can spend on an inherited building system. How to run a scan safely and read it for duplicates, orphans, defaults and absences.