mail@mabbaz.com Abu Dhabi, UAE

Blog

Posts tagged: Building Automation

Showing posts filtered to Building Automation. Show all posts.

Building Automation Oct 27, 2026
Securing Read-Only BACnet Data Access for Analytics
The protocol has no read-only client, so the restriction must be enforced elsewhere. Where that can be done, and how to verify it.
Building Automation Oct 27, 2026
Building a BACnet Integration Acceptance Test Checklist
The tests a demonstration never covers: proving the integration is read-only, that data survives an outage, and that restarts recover.
Building Automation Oct 27, 2026
BACnet COV Subscription Recovery After Gateway Restarts
A subscription is state held by the device, with an expiry. How it lapses, why the symptom is silence, and the loop that catches it.
Building Automation Oct 27, 2026
BACnet Polling Schedules for Mixed-Frequency Sensors
Set sampling rate per point from what the data is for, group points into rate classes, and budget the load against each trunk rather than the whole network.
Building Automation Oct 27, 2026
BACnet Sensor Timestamp and Clock Synchronisation
Controller clocks drift and nothing complains. What that breaks, and why event time and ingestion time must be stored separately.
CAFM Oct 27, 2026
What Is a BMS Data Historian?
What a historian is, why a general database is the wrong tool for it, when separation is justified, and the metadata layer nobody budgets for.
Building Automation Oct 27, 2026
BACnet Data Logging: Collection, Timestamps and Storage
Polling, change-of-value subscription and trend log objects produce different data with different resilience. Which to use per point, and what each one loses.
Building Automation Oct 27, 2026
Energy Meter Reset and Rollover: Avoiding False Alerts
Rollover, reset, replacement and the silent one, a configuration change. How to detect each and why consumption alerting needs them first.
CAFM Oct 27, 2026
BMS Data Retention Policy for Facilities Teams
Classify building data before setting any period, separate resolution from duration, and write a policy that is actually executed.
CAFM Oct 27, 2026
BMS Point-to-Asset Mapping: Change Control and Ownership
Why the point name is the wrong join key, the cardinality cases that break the simple model, and who should own keeping the mapping right.

Newsletter

Get new posts by email

A short note when I publish a new guide on enterprise tech, integration, or applied AI. No spam, unsubscribe anytime.

MAbbaz.com
© MAbbaz.com